Kettler 3.5m Parasol LED Lights and Speaker - Make it Monday!

Описание: We're unboxing a Kettler 3.5m parasol with LED lights and a wireless speaker and showing you how to put it together and use.

The Parasol:
https://www.garden4less.co.uk/product...

In the box you get:
Parasol with LED strips
Parasol cover
Parasol base
Wireless speaker
Solar panel

Constructing:
1) Put the base where you want it in the garden
2) Remove the inverted plate before using the handy inverted base stem handle to unscrew and remove the inverted base stem
3) Remove the base lid and fill the base shell with either water or sand to weigh it down
4) Put the lid back on and screw in the inverted base stem
5) Remove the base lever from the parasol
6) Attach it to the inverted plate using the plate bolts
7) Tighten them with the allen key
8) Slide the inverted plate into the inverted base stem, ensuring the notch goes into the gap
9) Screw it in place with the bolt and washer and tighten with the allen key
10) Screw the solar panel onto the parasol cap and screw that onto the top of the parasol
11) Slide the parasol onto the base lever
12) Screw them back together using the bolts and allen key

Functions:
1) Unscrew the parasol and lift it to the desired height, tighten the screw to hold it in place
2) Use the adjusting lever in either hole to open/ close the parasol or tilt it left/ right
3) Rotate the parsol using the base lever, make sure it clicks into place
4) Press the round silver button to turn the LED strips on and off
5) USB charger for the lights is situated on the parasol arm

Wireless Speaker:
1) Unscrew and pull down the middle section
2) Press the unlock button to open the hinge and attach it onto the middle section
3) Press and hold the wireless button to turn the speaker on
4) Turn bluetooth on your device e.g. phone, tablet etc.
5) Select 'Kettler'
6) You should here a connecting sound meaning you're able to play anything through the speaker
7) Press and hold the wireless button to turn the speaker off
8) Press the light button to turn the LED light on
9) Charge the speaker with the cable provided, plugging it into the port inside the speaker

Parasol cover:
1) Assemble the rod
2) Place it in the cover top
3) Use this to help you get the cover over the parasol
4) Zip it down and tighten it at the bottom
5) Tie it together to keep it in place
6) You should do this every time you finish using the parasol

This video is intended as a guide and addition to the instructions provided from Kettler and not a replacement.

We hope that these videos are helpful and please subscribe and follow us on social media for more!

Facebook - Garden4less
Instagram - @garden4less
Twitter - @garden4less
Pinterest - Garden4Less
https://linktr.ee/garden4less
LinkedIn - Garden4less

Direct links on our channel.