Long Handle Boat2Trailer Boat Latch Installation | Install Boat2Trailer | Ramp N Clamp
Автор: Boat2Trailer
Загружено: 2023-01-26
Просмотров: 35409
Описание:
This is the Long FULL installation breakdown video of the Long Handle Boat2Trailer Ramp N Clamp Latch. This shows every single step of installation. First you will need to remove your boat from the trailer so you may access the current roller or bow stop. Next you will need to remove the bow stop or roller. Install the boat latch in the mounting bracket the roller was in. Find the right angle or pitch to match the pitch of your boat. Tighten the bolt snug, roughly 20 - 24ft lbs so the latch can still pivot. Now pull the boat into the latch mechanism until you here the click. Once it has clicked into place you can install the handle. Make sure you place the handle in a low enough position so that it does not come into contact with the boat when you pull the lever. Now you are ready for use.
Find more info on
Website: https://www.boat2trailerhookup.com/
Facebook: / boat2trailer
Twitter: / boat2trailer
Instagram: / boat2trailer
Intro - 0:00
Remove Boat Roller - 2:21
Install Boat Latch - 3:39
Install Boat Latch Lock - 3:49
Snug Up Latch - 4:29
Install Handle - 5:09
Install Rope - 7:15
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
