GlazeGuard® High Gloss Sealer For Porcelain, Ceramic and Stone Tiles - CoverTec Products

Описание: https://www.covertecproducts.com/prod...

If you use a product for sealing ceramic or porcelain tile that’s not designed specifically for that surface, the problem is that it’s going to lift and peel.

Standard surface sealers need to absorb into the surface. Ceramic and porcelain are so dense that you won’t get that result.

You need something that’s got some adhesion promotion that will allow you to bond to the surface. Similarly, if you use penetrating or impregnating sealers, they need to soak into the surface. You can’t achieve that with a dense ceramic or porcelain tile. So it will not change the sheen, and it will also wear off very quickly.

Now if you use something like the GlazeGuard® Gloss, this is designed specifically to bond to that surface. It will provide a nice film across the tile and the grout. and a high sheen, wet look that will last for many years.


What Specific Components Of GlazeGuard® Gloss Provide Superior Results Consistently?

The components in GlazeGuard® Gloss are proprietary, but essentially we have adhesion promotion technology that allows for covalent bonding to a very dense ceramic or porcelain tile surface.

We use urethane technology, which is very durable, UV resistant, and it’s two parts create a very tough cross link that produces an industry leading seal over the tile and grout. And the amount of polymer in the product, almost 50% solids, which is much higher than standard floor finishes.

GlazeGuard® Approved Surfaces:
Ceramic
Porcelain
Stone
Marble
Concrete
Vinyl (VCT)
Interior Wood
Epoxy
Urethane.

Surfaces Not Recommended:
Polished Porcelain
Polished Ceramic
Polished Stone Tile
Exterior Wood.

What Kind Of Results Do Ineffective Floor Sealers Produce?

If you use a product that’s not specifically developed for ceramic and porcelain tile, what’s going to happen is:
It may put a film over the surface, but because there’s no way for it to absorb into the surface. It’s going to lift and peel very quickly.
It may last a few weeks, but after any standard use or cleaning of any kind, lifting and peeling will very quickly show up.
If you use penetrating types of sealers, you won’t see any change in appearance, or very little at all because there’s nowhere for those components to penetrate the tile.


Finish reading about GlazeGuard® Gloss finish on our product page here:
https://www.covertecproducts.com/prod...


Charles Idowu
Technical Director

10821 NW 50th Street Sunrise Fl 33351
Phone: 888-580-0693
Fax: 754-223-2467
Email: [email protected]

https://www.covertecproducts.com

Monday – Friday 8:30am – 4:30pm