Toyota/Lexus Check PCS System Warning (Fixed)

Описание: OK, for the better part of a month, I've had a "Check PCS System" warning on my 2016 Toyota Sienna.

This meant the Pre-Collision System and Radar Cruise would not work, but otherwise, it was still drivable

TechStream came up with 3 DTC's (P1572, B2090 and C1A11)

I was able to clear the P1572 code, but the B2090 and C1A11 remained.

I tried several scan tools and methods for clearing (including disconnecting the battery), but no luck in clearign the two remaining codes or removing the warning.

I did a bit of research, but all I found online were posts of people with the same problem having the dealership either do an expensive recalibration or replace millimeter wave sensors and/or Radar ECU's adding up to thousands in repair costs.

Then I stumbled upon a repair manual for a 2006 Lexus IS/GS models which stated how to adjust the axis beam automagically by using this method:

1) Turn Ignition Switch ON
2) Turn Cruise Main Swith ON
3) Depress Brake pedal and set the Cruise Control Main Switch to RES/ACC 3 times within 3 seconds

After racking my brain for a month and having the dealer quote me $500 just to re-calibrate, I can't believe I stumbled upon this quick and easy fix for a stupid warning light.

Went on a test drive and all systems seem to function like normal.

Radar cruiser works fine and the PCS flashes the "BRAKE!!" warning when closing in on a slower moving vehicle at a high rate of speed (scared a few folks on the way home tonight lol)

Anyways, if you have this warning on your dash, might wanna give this a shot if all you want to do is get rid of it.