How to Replace Inner Tie Rod 2003-2011 Honda Element

Описание: Shop TRQ on 1AAuto.com
Tie Rod Set https://trq.video/ia-1ASFK02897
Tie Rod https://trq.video/ib-1ASTE00641
Shop TRQ on Amazon
Tie Rod Set https://www.amazon.com/dp/B0779CF8SD
Tie Rod https://www.amazon.com/dp/B09JLM9C8F

This video shows you how to install an inner tie rod on your 2003-2011 Honda Element. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

This repair was done on a 2005 Honda Element EX 2.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2003 Honda Element
2004 Honda Element
2005 Honda Element
2006 Honda Element
2007 Honda Element
2008 Honda Element
2009 Honda Element
2010 Honda Element
2011 Honda Element

Tools you will need:
• Pry Bar https://trq.video/oLS-1AXAA00020
• 10mm Wrench
• 19mm Wrench
• 21mm wrench
• 24mm Wrench
• 10mm Socket
• 17mm Socket
• 18mm Socket
• 19mm Socket
• 8mm Socket
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet
• Socket Extensions
• Swivel
• Torque Wrench https://trq.video/oasu-1AXAA00044
• 1-1/8 Inch Wrench
• 9/16 Inch Wrench
• Gloves https://trq.video/oIu-1AXSS00048
• Marker / Writing Utensil
• Power Steering Fluid
• Safety Glasses
• Floor Jack
• Funnel
• Pick https://trq.video/oHw-1AXAA00037
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Honda Element 1st Generation 2003-2011:    • Honda Element 1st Generation 2003-2011  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.