1200mm dia. pan with polished surface

Описание: Here we have some 1200mm dia. pans that we have spun in 3.0mm Aluminium 1050A.

Due to the size of the spinning, a large diameter blank is required.

This blank is then centred on our hydraulic spinning lathe and spun at resolutions, where pressure is carefully applied to the material.

The first stage of the manufacturing process was to create a 1540 dia. blank from a 3.0mm sheet of aluminium.

To do this, two of our machine operatives took a 2 x 4 mtr sheet and cut into squares using a guillotine. The square then went onto the circle shear, which cut a 1540 dia. blank.

A 8mm ctr. hole was then drilled in the blank to allow this to be centralised when it goes onto the spinning lathe.

The 1200 dia. pan was spun using our hydraulic lathe.

Operating this lathe, takes great skill and you can see from the video, our experienced metal spinner gradually applying pressure using hand controls, which determine how much force there is against the material to form the shape.

After the parts were spun, they were then taken to our polishing bay. Here they were cleaned by our metal polishers due to the final use of the part needing a clean finish.

Contact Artec Engineering Precision Metal Spinners to see how we can help you on your next project.

01243 375555
[email protected]
https://www.instagram.com/p/C_zzjAgAJ...