Valve Adjustment with Mr. Watkins
Автор: J-Tech
Загружено: 2020-11-18
Просмотров: 29870
Описание:
Valve Adjustment with Mr. Watkins, Diesel Instructor here at J-Tech. Below are some steps/tips for the Valve Adjustment. Come to J-Tech and you'll be learning this, HANDS-ON! #JTech #Jacksonville #Florida #ValveAdjustment #Diesel #Engine
1. Normal timing marks are located on the flywheel, thru the observation hole in the bottom of the bell housing. (different locations per manufacturer)
2. Good idea to loosen all lock nuts prior to doing the adjustments. (not mandatory)
3. If your engine is already warmed up, check your spec sheet in the manufacturer manual for the hot adjustment.
4. 15 mm wrench for tightening lock nuts on the adjusting screws.
5. Timing marks are added to the vibration dampener here at the school (ref. #1)
6. Torque the lock nut to manufacturer specifications.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
