How to Replace Rear Brakes 2015-2019 Hyundai Sonata

Описание: Buy Now!
New Brake Rotor Set from 1AAuto.com https://trq.video/ia-1ABFS03634
New Brake Pad & Rotor Kit from 1AAuto.com https://trq.video/ia-1ABFS20344
New Brake Pads from 1AAuto.com https://trq.video/ic-1ABPS02691

This video shows you how to install rear brake pads and rotors on your 2015-2019 Hyundai Sonata. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This repair was done on a 2015 Hyundai Sonata SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2015 Hyundai Sonata
2016 Hyundai Sonata
2017 Hyundai Sonata
2018 Hyundai Sonata
2019 Hyundai Sonata

Tools you will need:
• Phillips Head Screwdriver
• Pry Bar https://trq.video/oJf-1AXAA00020
• 10mm Socket
• 14mm Socket
• 21mm Socket
• Air Compressor
• Brake Caliper Compressor Tool. Dual Piston. Pump Style.
• Brake Caliper Hanger https://trq.video/obD-1AXAA00439
• 1/2 Inch Impact Gun
• Ratchet
• Torque Wrench https://trq.video/oani-1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags
• Copper Anti-Seize
• Gloves https://trq.video/oAC-1AXSS00048
• Floor Jack
• Jack Stands
• Pick https://trq.video/oED-1AXAA00037
• Rubber Mallet
• Sledge Hammer
• Wire Brush https://trq.video/op5-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Hyundai Sonata 7th Generation 2015-2019:    • Hyundai Sonata 7th Generation 2015-2019  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.