8000 RPM Bedini Motor

Описание: I built a very simple roller blade wheel bedini motor with 6 very powerful neodymium permanent magnets that are 3/4" diameter x 1" length and have a pull force of about 100 pounds each. I built a massive electromagnet with a 3" diameter by 2" thick with a heavy gauge copper wire and several hundred turns of magnet wire which generates high voltage back EMF that can power different loads as a biproduct. The second smaller coil is a pick up coil for the timing that turns on a transistor to allow current to energize the primary coil. Once the timing is correct, this motor reaches a speed of 8000 RPM with a single electromagnet. The neodymium permanent magnets are permanently glued into the roller blade wheel. I am using a 12 volt DC battery to power the motor. However, at a very high speed and or 24 volts DC input, they can fly out, so be careful if you try to duplicate this motor. Have fun and be safe!