etrailer | Valterra Adjustable Water Regulator for RVs Spec Review

Описание: Click for more info and reviews of this Valterra RV Water Pressure Regulator:
https://www.etrailer.com/RV-Water-Pre...
Check out some similar RV Water Pressure Regulator options:
https://www.etrailer.com/dept-pg-RV_W...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-review-va...
Speaker 1: Today we're gonna be taking a look at the Valterra Adjustable Water Regulator. Part number A01-1117VP.Campground water pressure can be too high. Don't take a chance on it being unregulated and it harming your system. The Valterra Adjustable Regulator will let you determine for yourself how much pressure is going into your system. Most regulators operate between 40 and 50 Psi, this one will allow you to operate lower than that and all the way up to your RV's maximum pressure. And you can find that in your RV's documentation.Now you want to be sure and not exceed your RV's maximum pressure.

That can damage your entire water system. The gauge is also nice because it's going to allow you to troubleshoot your system to let you know if the problem is in your city water pressure, or if it's in your RV pressure.It has a built-in screen. Regulators that don't have a screen can allow dirt and debris to get inside, which can cause your regulator to malfunction or give you irregular flow. It's a lead-free brass construction. It's easy to install.

We'll go ahead and show you that now.First what I'm going to do, is locate our city water connection on our RV. Then we can go ahead and connect the male end of our regulator to our RV. I'm going to position my regulator up so I can read it easily. And it's a good idea not to over tighten, just get it nice and snug. That way we don't have any leaks.Then we can take our hose end and connect it.

Nice thing about our regulator here, is that the end swivels, which makes connecting easy and we won't have to worry about kinking our hose.Now we can go ahead and turn on our water faucet. Now we don't have to worry about opening it up all the way. Our factory preset on our regulator is 45. Now we can take our flat head screwdriver and adjust our brass screw at the top of the regulator here. Now Valterra recommends not going over 60 Psi.

You will want to be sure and check with your RV's owner's manual to see how much pressure it can handle. Once you get it where you want it, you're all set. You're ready to test the inside faucets.As you can see we've got good flow here on the inside. Now you can adjust your brass screw to the left or right to fine-tune your water pressure.And that's gonna complete our look at the Valterra Adjustable Water Regulator. Part number A01-1117VP.