How to Turbo a Crown victoria. The parts needed.

Описание: I am doing this for fun, I'm no race car driver, I'm not a professional technician. You work on your car at your own risk!!!
I can't promote any of the products yet as I have not used them yet.
I make no money from the links below.
I am ONLY sharing what I purchaced.
The parts list. as of before I get started.
P.S. I have seen this done using the 2" oem exhaust cut up into pieces which would save a bunch of money if you had the pacience. However, my intentions are to turbo the car, have some fun learning, remove the "kit", sell the car and build an F-150 using the 4.6L engine on my stand that I'm building for boost. Then use the turbo "kit" for the f150. so I decided on 2.5" plus it's nice to have extra pieces laying around.
P.P.S. most items can be found in 1 location, ebay, Amazon, or Walmart. I was searching for the absolute lowest price on each part.
Starting at the exhaust manifold.

Flange adapter. Part# 41725 Walker 41725 Exhaust Pipe Adapter https://www.amazon.com/dp/B0015KUCA2/...

O2 sensor flanges. x3, 2 for oem sensors and 1 for the wide band. https://www.amazon.com/dp/B00NY51B9C/...

2.5" 135" exhaust bend x1
2.5" OD Mandrel Bend Exhaust Elbow .065 16ga Aluminized Mild Steel Khaos Motorsports (2.5" OD 135 Degree Mandrel Bend) https://www.amazon.com/dp/B08R3ZCV3B/...

2.5" 90 degree bend x3
2.5" 45 degree bend
2.5'' Custom Exhaust Kit Universal Mild Steel 16PCS Tubing Mandrel Bend Pipe Straight & U-Bend (2 PACKAGES SHIPPING)) https://www.amazon.com/dp/B088CYH6HX/...

2.5" Y pipe
LCGP 409 Stainless Steel 2.5 Inch Y-Pipe, Universal Stainless Steel Diesel Y-Pipe, Inlet 2.5" Outlet 2.5" Length 10" https://www.amazon.com/dp/B07P18N44W/...

2.5" Flex pipe
Rev9 Stainless Steel Flex Pipe Exhaust Couplings With Pre-Welded Mild Steel Extension (2.5" x 10" (14" Overall)) https://www.amazon.com/dp/B078WHJ7WG/...

2.5" Exhaust Clamps
https://www.ebay.com/itm/4PCS-2-5-Sta...

60mm wastegate
https://www.walmart.com/ip/702756627

GT45 Turbocharger
https://www.ebay.com/itm/Turbo-Gt45-T...

GT45 Turbo flange https://www.ebay.com/itm/KLM-T4-TO-2-...

GT45 vband and flange
https://www.ebay.com/itm/Stainless-st...

3.75 to 3" exhaust pipe
https://www.ebay.com/itm/3-inch-OD-To...

GT45 Turbo blanket
https://www.ebay.com/itm/Turbocharger...

GT45 Oil Feed Line (came with turbo)

5/8" Oil Drain line from turbo.
Napa pnNBH H-1712

12v Oil scavenge pump.
https://www.walmart.com/ip/Ktaxon-12-...

Brass fittings for Oil Feed and drain/return.
Home depot $30

Cone air filter ("free"found in garage)
3" charge pipe

3" charge pipe fittings

3" charge pipe with Blow off Valve mount
https://www.ebay.com/itm/50MM-BOV-Blo...

Blow off Valve
https://www.ebay.com/itm/Blow-Off-Val...

Boost controller
https://www.ebay.com/itm/30-PSI-ANODI...

24x12x3" Intercooler
https://www.amazon.com/dp/B078BN2VXC/...

29lb fuel injectors (I chose these based on my wants)
ebay

Aem 340lph fuel pump
https://www.ebay.com/itm/AEM-340lph-H...