Do-it-yourself refilling of car AC with R1234YF. Instructions for filling and sealing AC

Описание: Refill your car's air conditioning with the most powerful and comprehensive product on the market.
See how quickly and simply it can be done with www.cool5.eu/en

Why COOL5:
ecology - natural hydrocarbon agents (not affecting the ozone hole)
ease of application and effectiveness - COOL5 agents easily mix with fluorine gases
safe handling
savings - up to 5 x cheaper than a service in a specialised workshop

COOL5® HOT SUMMER FULL KIT AC REPAIR is a revolutionary preparation with comprehensive action, designed for individual use. Is a revolutionary all-rounder, designed to carry out a complete air conditioning service yourself (DIY) in just a few minutes. No need to visit in a specialised workshop. Without the need for special tools. Without creating a vacuum.

COOL5® is 5 substances enclosed in a single package, corresponding to
5 steps of a professional service procedure used in specialised workshops. Use COOL5® and do it yourself:

Step 1: Chemical DRYING of the system. Micro-particles of harmful moisture can turn into ice crystals, impeding the flow of refrigerant and causing compressor seizure. The innovative chemical compounds contained in COOL5® bind moisture in the system, turning it
in the system, turning it into a synthetic oil that helps the entire system work.

Step 2: SEAL all the rubber parts of the system, which are the most likely to leak refrigerant.

Step 3: SEAL all aluminium components in the system which, due to contact with moisture, oxidise and perforate - creating micro leaks.

Step 4: LUBRICATION of the system compressor with the synthetic oil contained in COOL5® as recommended by leading A/C compressor manufacturers.

Step 5: FILL the system with the required dose of refrigerant, which is a compatible hydrocarbon gas mixture. COOL5® is easily mixed with all types of refrigerants available on the market.

How to use: by using COOL5® you will supply your air conditioning system with all the necessary components it needs for smooth and uninterrupted operation:
1. start the engine, switch on the air conditioning and open the engine compartment. 2. shake the container to mix and activate all 5 COOL5® substances.
3. connect the pressure gauge hose to the container. Plug the plastic end of the line into the A/C low pressure service port marked LP (13mm or 17mm diameter). Look for the LP port on the A/C aluminium tube located around the engine (usually just behind the front belt). 5. turn the container upside down and begin to charge the contents.6. finish the operation at a gauge reading of 45 psi (in the middle of the green area of the clock). Take into account the outside temperature as shown in the table below. 7. do not switch off the engine
and air conditioning for a few minutes, allowing the COOL5® formulation to reach full efficiency.

PREPARATION WEIGHT:
290 grams of agent is equivalent to 850 grams of original R134a refrigerant.
90% of the preparations available on the market have a weight of 170 grams, which makes COOL5® 70% larger and allows it to charge and repair 2 cars
with a standard-sized air conditioning system.