Why is My Bambu X1 Carbon Printer 'Pooping' Where it Prints?

Описание: MAKE SURE YOU WATCH THE END OF THE VIDEO TO SEE ME MAKE A FOOL OF MYSELF!

We're going full time! Help to make it a Success!
  / needitmakeit  

We find out what's been causing the issue with Printer Poo ending up in the build chamber, in my prints, and also on the buildplate. It wasn't clean when I started to have the problem what the cause was, but I believe we've been able to find the source.

I recently started to print with PETG again after mainly printing with PLA in color for about 3 months. PETG has some great benefits, like the ability to say very flat, it can be printed without an enclosure, and it has a higher transition point than PLA, so when we faceoff PLA VS PETG, there are some tradeoffs. PLA is easier to print with in my opinion.

On the other side of it, PETG needs to be very dry, it likes to create lots of strings, and it oozes from the nozzle much more than PLA or ABS/ASA. This leads to a series of different problems when you want to print with PETG in color as I have shown in the video.

If you're interested in checking out Bambu / Creality Printers and filament, here is my affiliate link (a small portion of any sales helps fund future videos):

BAMBU PRINTERS
https://shrsl.com/4aghz

CREALITY PRINTERS
https://shrsl.com/4aghy

CREALITY HYPER PLA
https://shrsl.com/4aghn

3mm Thick High Temp Silicone Bar
https://amzn.to/46jBuPu

Silicone Wiper - Design by Sealight333
https://www.printables.com/model/4946...

Silicone Wiper - My Design
https://drive.google.com/file/d/1v9EB...

#bambu
#3dprinting
#vibration
#review