BMW ACC Retrofit Part 2 – ABS Pump Swap, Coding & Airbag Disaster F32 435i

Описание: Welcome back to Part 2 of the BMW F32 ACC (Adaptive Cruise Control) retrofit — the chapter where everything gets real. This is the full behind-the-scenes journey: wiring fixes, steering wheel upgrades, ABS pump replacement, airbag chaos, coding disasters, and the moment ACC finally works in real traffic.

If you're retrofitting ACC (Option 5DF) into your BMW F32/F30, this video shows the entire real process — not the polished fantasy. I show every problem, every fix, and every lesson learned so you don’t repeat my mistakes.

---

WHAT YOU’LL SEE IN THIS VIDEO

• Fixing wiring from previous retrofits + routing twisted-pair cables through the cabin
• Replacing damaged PDC and parking assist connectors with OEM plugs
• Steering wheel removal, ACC button upgrade, leather cover swap, and airbag module handling
• ABS/DSC pump removal and replacement with the correct ACC-specific unit
• Why you should NOT try coding a regular MK100 pump to behave like an ACC pump
• Protecting brake lines, managing fluid loss, and preparing the pump bracket
• First ignition after hardware swap: the BMW Christmas tree of errors
• Coding DSC, ICM, and FRR radar with E-SYS (including injecting the missing CAFD)
• Switching VO from 544 → 5DF and coding everything to default
• Clearing faults in ISTA and validating each module
• Airbag saga: 6-month wait for new units, rebuilding covers, drilling rivets
• Final wiring cleanup and interior reassembly
• Real-world ACC stop & go test in traffic – braking, following distance, engine restart logic

This is the full journey — the good, the bad, the expensive, and the satisfying.

---

00:00 When Everything Breaks: Airbags, Wiring & ACC Chaos
00:06 Fixing Old Mistakes – Rebuilding the Wiring the Right Way
04:04 Upgrading the Steering Wheel for Real ACC Functionality
09:53 The ABS Pump Nightmare – Why ACC Needs the Right Hardware
14:50 Coding the "Impossible" as I was told by a BMW technician – E-SYS, ISTA & Bringing the Car Back to Life
25:31 Airbags, Rivets & Six Months of Pain – The True Cost of Retrofits
29:36 The Moment of Truth – ACC Stop & Go Test in Real Traffic

---

IMPORTANT SAFETY NOTE
ACC retrofit affects brakes, ABS, airbags, and vehicle control systems.
Always:

• Disconnect the battery before working on the car
• Follow official service procedures
• Use ISTA/E-SYS (I do NOT recommend BimmerCode for this)
• Fully power-cycle the car before driving and calibrate brakes and the ACC radar
• Clear all errors and verify module status before road testing

Your safety is worth the extra time.

---

RETROFIT DETAILS
• Chassis: BMW F32 435i (2014)
• Option: 5DF Adaptive Cruise Control
• Units replaced: ABS/DSC pump, steering wheel buttons, wiring connectors
• Modules coded: FRR (radar), ICM, DSC
• Software used: E-SYS, ISTA

---

WATCH PART 1 (Radar Install + Wiring)
   • BMW F32 Adaptive Cruise Control (ACC) Retr...  

MORE BMW RETROFITS & PROJECTS
@DorksAndBolts

If this helped you avoid headaches (or airbags exploding mid-project), hit LIKE, drop a COMMENT, and SUBSCRIBE — it tells YouTube that more BMW retrofit people should see this.