Multitasking on ESP32 with Arduino and FreeRTOS - Project 2

Описание: 1. In the setup function, reduce CPU Frequency from 240MHz to 80MHz
2. Enable watchdog timer - must reset watchdog every 5 seconds
3. Turn off Wi-Fi when it is not needed to save energy
4. Modify Task in Project#1 such that ESP32-S2 goes to deep sleep after 6 PM and wakes up after 6 AM
5. Add an interrupt routine to the input switch, turn on the built-in LED, and set up a timer interrupt for 1 second to off the LED
6. Measure the built-in temperature sensor on ESP32-S2 every six seconds. Put the measured data into a queue
7. Create a task to display all the data from the queue on Serial.println() every twenty seconds

Previous video: Multitasking on ESP32 with Arduino and FreeRTOS (Update time with NTP server) - Project 1:    • Multitasking on ESP32 with Arduino and Fre...  

Next video: Print Temperature Sensor Data To An IoT Server (Blynk) Arduino ESP32S2 Cucumber - Project 3:    • Print Temperature Sensor Data To An IoT Se...  

‪@Denovative‬