Glasdon UK | how to install | Aero™ shelter
Автор: Glasdon UK Limited
Загружено: 2013-05-10
Просмотров: 2008
Описание:
For more information on the Aero™ cycle shelter or to request a quote, please visit http://www.glasdonshelters.com/aero-t...
The Aero™ Shelter can be installed in under 45 minutes without the need for expensive groundworks.
For optimum fixing performance the following procedure is recommended.
1) All products are to be positioned on a suitable sized, flat, level and square concrete base.
2) The concrete base should be of a minimum 25N/20mm mix strength equivalent to BS. 5328, Section 2, Part 10, Grade C25.
3) Using the supplied unit as a template, mark out all the base fixing positions and then drill the holes.
4) Move the unit back into position and clean the drill-holes thoroughly using a spiral brush and remove all dust using a blow out pump, airline or similar.
5) Push the anchor through the fixture and into the drillhole. This is an interference fit anchor and may require tapping by hammer.
6) Once fully seated, tighten using a torque wrench set to the appropriate setting as shown in the table below. Once the correct setting is reached, the anchor is set and the fixture load may be applied.
Subscribe to our channel: https://www.youtube.com/user/GlasdonU...
Follow us on:
Twitter - / glasdonuk
LinkedIn - / glasdon-uk-limited
Google+ - https://plus.google.com/+GlasdonUKLtd
Facebook - / glasdonuk
Flickr - https://www.flickr.com/photos/glasdonuk
Pinterest - / glasdonuk
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
