Laguna 3hp C Flux Series Cyclone Dust Collector | Woodworking Dust Collection

Описание: Price the Laguna 3hp C Flux Series Cyclone Dust Collector on Amazon: http://amzn.to/2EkyXf1
Dust collection is a must! - Nothing kills productivity more than a messy shop. Not only does poor dust collection create an unnecessary mess, it also puts dangerous fine dust particles into the air that can be harmful to your respiratory system. With these things in mind, proper dust collection is a must for any woodshop. There are a variety of options for dust collection from smaller single stage units to larger multi-stage dust collectors. The many options of dust collection out there, the biggest thing is getting the dust collection right at the source. You want enough performance out of the unit you choose to make the correct vacuum and extraction at the tool.

Laguna C-Flux: 3 Cyclone Dust Collector

We have had this dust collector in our shop for about two months now and have put it through its paces.

Specifications

Dimensions: 46”L x 27”W x 79”H
Weight: 309 lbs.
3hp, 220v, 22 amps
Assembly

The dust collector arrived in a very well-built crate. Inside the crate, all pieces were well packaged within custom fit Styrofoam. We laid all the pieces out and opened up the instruction booklet. The instructions were not the best; however, we were able to figure it out pretty easily and they were certainly good enough to get the job done. Assembly took approximately 4-6 hours with one person. We do suggest that you get help when it comes time to flip the unit back onto its feet. Other than that, one person can handle assembly no problem. The unit comes pre-wired but lacks a plug. This is fairly common for large power tools as it enables the user to match the plug type to their outlet. We used a NEMA L6-30P plug and NEMA L6-30R outlet, both of which can be found at your local home store. Once assembled and wired, this unit is rock solid and ready to work!

Mobility

This dust collector is highly mobile when needed. The unit sits on four 4” casters that allow the user to easily wheel it anywhere in the shop. For a 300+lb machine, this unit glides across the floor with ease. Most other cyclones on the market are either positioned on a stationary stand or mounted to the wall. The ability to move this dust collector across the shop if needed is a huge plus.

Dust Bin

The dustbin is our favorite feature on this dust collector by far!  It has a 46-gallon capacity, which should last a fairly long time unless you are milling all day long. The ingenious lift mechanism makes emptying the dustbin a breeze. Engaging the mechanism lifts the bin off the floor and seals it against the lid, thus eliminating the need for a short run of flex hose. Lower the bin, wheel it out, empty the bag and you’re done. We have had the opportunity to use many different dust collectors and this unit has the easiest and fastest bag changes by far.

Filter

This dust collector comes with a 1-micron filter stack, which captures 99.97% of dust particles 0.2 – 2 microns in size. These small dust particles can be very harmful to your health and are also what causes the accumulation of a fine dust layer throughout your shop. We still recommend you wear a respirator in the shop when possible, but this unit’s filtration is a vast improvement over our previous dust collector. The filter stack is equipped with a cleaning crank, which is manually operated to knock the built up dust out of the filter and down into a secondary collection bag. The crank has a 270-degree rotation, which ensures the two internal fins have full coverage of the filter stack. This unit does have an optional auto-clean kit. With this feature installed, a sensor detects a rise in static pressure, indicating a clogged filter, and activates the cleaning procedure.