PULLING A CIVIC ENGINE FOR THE FIRST TIME!!! - EP 3. Budget Civic Build

Описание: In this episode of the budget civic build, I remove an engine for the first time from my 1994 HONDA CIVIC HATCH! I also reveal what engine I will be swapping into the car! This is a step by step video on how to remove your civic engine!

ENGINE REMOVAL CHECKLIST:
Drain fluids from engine / trans / radiator
Remove axles, start with axle nut 32mm, remove cotter pin, remove 17mm castle nut, pull hub up and away to remove axle, remove axle from trans
Remove intake
Remove radiator
Disconnect battery
Remove harness lines from fuse box
Unplug passenger side shock tower harness
Unplug wiring harness connections on transmission
Unplug driver side harness
Disconnect grounds
Disconnect MAP sensor
Remove heater core coolant hose
Remove fuel filter locking nut and line
Remove top hose on intake manifold
Remove emission solenoid to remove hose
Remove brake booster hose
Remove fuel pressure regulator
Remove throttle cable
Double check for any other connections
Remove shift linkage, remove knob, console
Remove exhaust downpipe
Remove clutch line from transmission
Support engine from underneath
Remove transmission front mount
Remove rear mount bolts then mount
Remove transmission side top mount / passenger side
Remove engine front lower mount
Remove driver side mount
Lower Engine Down into mover dolly
Jack Chassis up to make space to pull engine out through passenger wheel well


Youtube Vids to help:
   • DIY ENGINE SWAP | 92 CIVIC ENGINE & TRANSM...  

Socials:
IG - ‪@DrivenJT‬

TAGS:
#diy
#diycivic
#civichatchback
#civicbuild
#civics
#jdm
#hondacivic
#engineswaps
#engineswap
#civicmodified