High and low speed in CNC machine 4040

Описание: Master the essential startup and navigation procedures for your CNC machine using the **RichAuto DSP controller**. This guide covers the critical "Homing" process and how to manually move your machine using various control modes.

---

🏠 What is the "Home" Position?

Understanding the "Home" position is the foundation of CNC accuracy and safety.

**Mechanical Origin**: "Home" is defined as the fixed mechanical original position of the machine.
**Limit Switches**: This position is determined by the machine's physical limit switches and will not change unless those switches are moved.
**Startup Routine**: For the best results, it is highly recommended to let the machine "go home" every time you start it up to sync the controller with the physical hardware.

---

⚙️ How to Home Your Machine

Follow these steps to properly initialize your CNC at the start of a session:

1. **Power On**: Press the power button on the machine's control box.
2. **System Loading**: Allow the RichAuto system to finish its boot-up process.
3. **Select Home Type**: When the "HomeTypeAtStart" menu appears, select **"All axis home"**.
4. *Confirm**: Press the **HOME (9)* button to begin the sequence.
5. **Observe**: Watch as the machine automatically moves the X, Y, and Z axes to their mechanical reference points.

---

🕹️ Manual Movement Modes

The RichAuto DSP controller offers different ways to move your spindle manually across the workbed. You can switch between these modes by pressing the *Mode* button.

**Continue Mode**: This mode allows for fluid, continuous movement along any axis. The machine will continue moving as long as you hold down the directional button.
**Step Mode**: Ideal for fine-tuning your position, this mode moves the machine in small, preset increments with every button press.
**Distance Mode**: This mode allows you to input a specific distance (for example, 50mm) and the machine will move exactly that amount when a direction button is pressed.

---

🔍 Related Tags:

#CNC #RichAuto #DSPController #CNCHoming #Woodworking #MakerSpace #CNCWorkflow #MachiningBasics

*If you found this tutorial helpful, please 👍 Like and 🔔 Subscribe for more CNC tips!*

Would you like me to help you create a guide on how to *set the work origin (G54)* once your machine is homed?