2026 में नए तरीके से ब्लाउज की कटिंग करना सीखो

Описание: Simple blouse (Sada Blouse) ki cutting karna kaafi aasaan hai agar aap step-by-step measurements aur marking ko samajh lein. Niche diye gaye tarike se aap ghar par asani se cutting kar sakte hain:
​1. Zaroori Saaman
​Kapda: Lagbhag 80 cm se 1 metre.
​Tools: Inch tape, chalk (marker), kainchi (scissors), aur scale.
​2. Measurements (Naap)
​Cutting se pehle ye naap taiyar rakhein:
​Length (Lambaai): Jitni taiyar chahiye usme 2 inch extra (fold ke liye).
​Chest (Seena): Seene ka chautha bhag (1/4) + 2 inch extra (margin).
​Shoulder (Teera): Aksar 5 se 5.5 inch.
​Armhole (Modha): 5.5 se 6 inch.
​Gala (Neck): Chaurai 2.5 inch, lambaai pasand ke anusar.
​3. Cutting ke Steps
​Step 1: Kapda Bichana
​Kapde ko ulta karke double fold mein bichayein. Band wala hissa (closed side) apni taraf rakhein.
​Step 2: Back Part (Piche ka Palla)
​Lambaai: Taiyar lambaai + 1.5 inch mark karein.
​Shoulder: 5.5 inch par nishaan lagayein.
​Armhole: 6 inch niche nishaan lagakar ek 'L' shape banayein aur halki golaai (curve) dein.
​Chest: Seene ka 1/4 hissa + 1.5 ya 2 inch margin lekar line khinchein.
​Gala: 2.5 inch chaurai aur piche ki lambaai (manpasand) lekar golaai dein.
​Step 3: Front Part (Aage ka Palla)
​Aage ka palla hamesha piche wale se 1 inch bada rakhte hain (kyunki isme plates/tucks dalti hain).
​Armhole ki Golaai: Aage ke armhole mein piche wale se thodi gehri golaai (0.5 inch andar) dein taaki jhol na aaye.
​Tucks (Plates) ki Marking: * Sabse main tuck upar se 9.5 ya 10 inch niche (Buspoint) par lagayein.
​Is point ke charo taraf 1.5 - 2 inch ki doori par 4 plates ke nishaan lagayein.
​Step 4: Sleeves (Aastin)
​Bache hue kapde ko 4 fold karein.
​Lambaai + 1.5 inch margin lein.
​Khule wale hisse se 3 inch niche 'S' shape mein golaai dekar cut karein.