How To Remove / Replace Clock Spring Cable Reel + Steering Wheel & Airbag Honda Accord 2003-2007

Описание: This is a step-by-step tutorial & DIY auto repair guide on how to remove, replace & install clock spring also known as cable reel on 2003-2007 Honda Accord (which is the same for years 2004, 2005 & 2006 Models DX LX & EX) by young mechanic Aiman. The clock spring has the wiring which controls the Horn, Cruise Control, and the Radio Controls on the steering wheel.

The process involved removing first the airbag, followed by the steering wheel. It only requires simple general tools except for the TX30 star type socket or screwdriver.


The steps are actually not too difficult, only a few basic tools are required but if you are not too comfortable dealing with airbags then you should consult or have it repaired by qualified automotive technicians or auto repair shops and garages or auto dealership.

Some of the tools you might need would be flat head & phillip screwdrivers, T30 star / torx wrenches and basic sockets / ratchet. No power tools are required. Most of the electrical connectors can be unsnapped easily.

Word of caution is make sure you disconnect the battery first, wait a few minutes (20 minutes or longer is highly encouraged), and avoid possible static discharge via clothing or other possible methods. Once you unplug the airbag itself, it can't go off. There's a shorting bar built into the connector of all airbags, that joins the two terminals to prevent "stray" voltage from being able to set the bag off.

In most cases, once you've removed the airbag and center bolt, the steering wheel can just be wiggled or pulled out. However, in some cases, wheel puller tools have to be used in order to remove the stubborn steering wheel (we used Bolt Type Wheel Puller Set 46-Piece by Pittsburgh Automotive from Harbor Freight Tools, and we've also done an exclusive video on how to do that, click here for that video:

If you just want to find out how to remove only the airbag, you can click on the following link:    • How To Remove, Change Or Replace Airbag (O...  

If you want to find out just how to remove / replace the steering wheel, click on the following video:    • How To Remove Or Replace Steering Wheel On...  

This video was done a 2004 Honda Accord, however, the process may be the same for most Honda or Acura models such as Civic, CRV, Element, Pilot and Odyssey. Even if it's not exactly the same as they will be some variances between the years and model, it may still give you a rough idea on how to do it on the vehicles manufactured by Honda.

Thanks for watching.... This video is presented to you by young mechanic Aiman-Imran Zulhilmi Anuar. Please be sure to watch other DIY auto repair videos on Aiman's EyeOnAiman youtube channel & facebook page.

Disclaimer of Liability (No Responsibility): Please exercise due diligence with information obtained from this video. The information contained in this video is for entertainment purposes and should only be treated as such. I shall not be held liable for any damage to vehicles, tools, equipment or person resulted therein. This channel assumes no liability for property damage or injury incurred. You will use such information at your own risk. Aiman recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Any injury, damage or loss resulted from using information in this video is the sole responsibility of the user and not EyeOnAiman.

Recording Date: August 3, 2018
Video URL:    • How To Remove / Replace Clock Spring Cable...