How to Replace Front Upper Control Arm Bushings 1997-2006 Jeep Wrangler

Описание: Shop for New Auto Parts at 1AAuto.com https://trq.video/c-562-dZ
This video shows you how to install front upper control arm bushings on your 1997-2006 Jeep Wrangler. Rubber bushings help smooth out a ride, but are susceptible to wear or drying out and crumbling over time. This bushing is replaceable separate from the control arm, and you can replace it yourself.

This repair was done on a 1997 Jeep Wrangler Sport 4.0L Sport Utility 2-Door 4WD Manual and the process should be similar on the following vehicles:
1997 Jeep Wrangler
1998 Jeep Wrangler
1999 Jeep Wrangler
2000 Jeep Wrangler
2001 Jeep Wrangler
2002 Jeep Wrangler
2003 Jeep Wrangler
2004 Jeep Wrangler
2005 Jeep Wrangler
2006 Jeep Wrangler

Tools you will need:
• 15mm Wrench
• 15mm Deep Socket
• 15mm Socket
• 19mm Socket
• Press
• Air Chisel
• Ratchet
• Torque Wrench https://trq.video/oaN3-1AXAA00044
• Gloves https://trq.video/oap8-1AXSS00048
• Safety Glasses
• Sandpaper
• Floor Jack
• Hammer
• Jack Stands
• Pole Jack
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Jeep Wrangler 2nd Generation 1997-2006:    • Jeep Wrangler 2nd Generation 1997-2006  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.