Beretta 92X RDO Optic Ready - Toni System base plate multi red dot mounting tutorial

Описание: 00:00 Introduction
00:11 Kit and tools
00:22 Remove the covers on the slide and clean up any dirt residues
00:30 Choose the plate according to the ret dot model you want to use
00:32 Consequently choose the pins and the screws according to the ret dot model you want to use
00:45 Mount the plate on the slide (the thread locker is already on the screws)
01:14 Insert the locator pins on the plate following the letters, then mount the red dot with screws following the numbers as shown in the scheme (00:32)
01:27 Mount the choosen red dot


1- Rimuovere i tasselli di copertura sul carrello.
2- Pulire e rimuovere eventuali residui di sporcizia.
3- Scegliere la piastrina a seconda del modello di red dot che si vuole utilizzare.
4- Montare la piastrina sul carrello utilizzando le viti fornite (già dotate di frenafiletti)
5- Inserire i pin sulla piastrina seguendo le lettere e montare poi il red dot con le viti seguendo i numeri nello schema.

1- Remove the covers on the slide.
2- Clean and remove any dirt residues.
3- Choose the plate according to the red dot model you want to use.
4- Mount the plate on the slide using the screws provided (the thread locker is already on the screws).
5- Insert the locator pins on the plate following the letters, then mount the red dot with screws following the numbers as shown in the scheme.



Web: http://www.tonisystem.it/
Fb:   / tonisystem  
Ig:   / tonisystem_official  

#tutorials