Steel Cutting Saw # Metal Cutting Machine

Описание: Dear viewers,
Health hazards from cutting and brazing operations include exposures to metal fumes and to ultraviolet (UV) radiation. Safety hazards from these operations include burns, eye damage, electrical shock, cuts, and crushed toes and fingers. Many of these can be controlled with proper work practices and personal protective equipment (PPE). This Video provide information about potential hazards and possible solutions associated with these operations.

Hazards:

Projected particles.
Electric shocks.
Breakage of the disc.
Cuts and amputations.
Blows caused by objects.
Abrasions and becoming trapped.
Overstrain.
Ambient noise.

Potential Hazards and Possible Solutions:
Wear appropriate CSA-certified personal protective equipment, including safety glasses, hearing protection and footwear as necessary.
Wear approved respiratory protection when necessary.
Handle and store wheels as directed by the manufacturer.
Inspect all wheels for possible damage before mounting.
Use the proper blade for the material being cut.
Check machine speed against the maximum safe operating speed marked on the wheel.
Make sure that mounting flanges are equal and the correct diameter (at least 1/4 of the wheel diameter).
Use mounting blotters when they are supplied with wheels.
Clamp work firmly in place when using non-reinforced cut-off wheels.
Use a properly designed safety guard covering at least one half of the grinding wheel.
Allow mounted wheels to run at operating speed, with guards in place, for one minute before cutting.
Bring wheel into contact with the work without bumping on impact.
Turn off coolant before stopping the wheel to avoid an out-of-balance condition.
Keep working surface clean of scraps, tools and materials.
Keep floor around saw clean and free of oil and grease.
Make sure that the saw has a start/stop or emergency button within easy reach of the operator.
Do not use a cracked wheel or one that has been dropped or damaged.
Do not force a wheel onto the machine or alter the size of the mounting hole. If the wheel does not fit the machine properly, get one that will.
Do not exceed the maximum operating speed marked on the wheel.
Do not use mounting flanges whose bearing surfaces are not equal, clean, flat and free of burrs.
Do not tighten the mounting nut excessively.
Do not grind on the side of the wheel.
Do not start machine until the wheel guard is in place.
Do not stand directly in front of the cut-off wheel when starting a machine.
Do not jam, bend or pinch the wheel.
Do not force cutting such that the motor slows.
Do not cut without proper ventilation.

Please Join My Other Social Media Platform:
1) Facebook Website:   / rajlalan.kum.  .
2) Twitter Website:   / lkumar22898085  
3) Instagram Website:   / lavalendra  
4) Subscribe For More Updates .....
5) LKGuide22