Europipe Exhaust Stage 2 installed Porsche 911/997 turbo - vacuum sound gone
Автор: Jim Wong
Загружено: 2019-08-16
Просмотров: 15351
Описание:
Europipe exhaust stage 2 installation on my 997 turbo, did some stock vs Europipe sound comparisons,
Make sure Not to break the studs or you will have a very bad day/week!
I followed the bumper removal guide from TheRock88 - https://www.6speedonline.com/forums/9...
Parts used:
997 111 217 70 Steel gasket (exhaust catalytic)
999 084 203 01 x 8 Lock nuts
900 081 059 01 x 8 studs exhaust
High temp anti seize for O2 sensors and studs/bolts
stubby 13mm open end wrench
consider replacing your O2 and Lambda sensor (I didn't, Lambda sensors are $$)
Torch
PB Blaster
Misc tools
Just a quick update, (5/1/20) with the Cobb stage 2 map and my relatively new stock clutch (less than 9k miles), it is starting to slip under heavy load or torque. Like if I were to drive 70mph at 4th or 5th gear and I floor it, it will slip. Going to have to upgrade the pressure plate to the Sachs 764 soon which has a higher clamping force.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
