One-Handed Impeller Removal in a Tight Engine Room — ImpelPro in Action

Описание: When there's no room for two hands, most tools become useless.

This is a real engine room — six bolts, limited swing, one arm in at a time.
Eddie Protzeller shows exactly how the ImpelPro seats, closes, and pulls
with one hand when that's all the space allows.

What you'll see:
→ Draining the sea strainer and pulling the cover (expect a little water)
→ Reading the cam lobe position to find the two widest grip points
→ Centering the arms on the shaft away from the grooves
→ Winding the knurled section one-handed to close the arms
→ Using a 9/16" wrench single-handed to start the pull
→ How the bearing transfers load so you're not fighting the tool

Works on all flexible vane impellers from 1 9/16" to 4 5/8".

🔧 GET THE IMPELPRO PULLER
Website: https://www.impelpro.com
Amazon: https://www.amazon.com/dp/B0F2KZJZM5

📲 MORE ENGINE ROOM TIPS
Instagram:   / impelprousa  
Facebook:   / impelprousa  
LinkedIn:   / impelpro-impeller-puller  

CHAPTERS
0:00 – Close through-hull, drain sea strainer, remove 6 bolts
0:15 – Expect some water — catch it or let it go to the bilge
0:37 – Crack the cover, hear the air, pull the last bolt
1:04 – Cover off, impeller exposed
1:10 – Find cam lobe and pick the two widest grip points
1:30 – Position arms at center of shaft, wind tool out to widen
2:00 – Seat tool and close arms one-handed with knurled section
2:25 – Start extraction with 9/16" wrench — one hand only
2:58 – Why the bearing makes this easier under load
3:20 – Wind threaded rod to shaft and begin the pull

#TightEngineRoom #ImpellerRemoval #OneHanded #ImpelPro #BoatMaintenance #ImpellerPuller #DIYBoating #MarineMechanic #StuckImpeller #BoatYoga