RTK GPS Base and Rover Setup in 5 Minutes – ComNav Mars Pro | Vector RTK

Описание: Base and rover setup in 5 minutes with two ComNav Mars Pro Laser RTK receivers and Survey Master.

Your own corrections, by radio: one receiver sits on a known point as the base and sends corrections over UHF; the rover uses them for an RTK fix.
Step 1: Set up the base – Mars Pro on a tripod over your mark, level it and measure the instrument height.
Step 2: Connect Survey Master to the base by Bluetooth.
Step 3: Start the base and radio – base mode, enter the base position, set the internal UHF datalink channel.
Step 4: Set up the rover – connect to the second Mars Pro on the pole, set rover mode and match the radio settings.
Step 5: Get fixed, then check – wait for a fixed solution, then measure a known point before you start.

ComNav Mars Pro Laser RTK specifications (as listed by ComNav): 1668 channels; datalink Tx/Rx 410–470 MHz, transmit power 0.5/1/2 W adjustable; RTK H 8 mm + 1 ppm, V 15 mm + 1 ppm; IP67; 1.2 kg with two batteries. Free RTK licence included with your rover.

More at https://www.vector-rtk.co.uk

Supplied and supported by Vector RTK, authorised ComNav dealer and repair centre. Contact Vector RTK for pricing.

Related videos:
RTK GPS Base and Rover Setup in 5 Minutes – ComNav Mars Pro #Shorts –    • RTK GPS Base and Rover Setup in 5 Minutes ...  
How to Set Up a GNSS RTK Base Station Over a Known Point | Vector RTK –    • How to Set Up a GNSS RTK Base Station Over...  
GNSS RTK Base and Rover Setup over UHF Radio | ComNav | Vector RTK –    • GNSS RTK Base and Rover Setup over UHF Rad...  

Follow Vector RTK:
TikTok:   / vector.rtk.ltd  
Instagram:   / vector.rtk.ltd  

Available to purchase from vector-rtk.co.uk
https://www.vector-rtk.co.uk
Call 07305 628695