DIY BOWSTRING SILENCERS WITH PARACORD
Автор: Premier Coup Outdoors
Загружено: 2024-11-22
Просмотров: 302
Описание:
Hey 👋 everyone! David here! I'm making DYI bow string silencers for my 62" 35-pound PSE Nighthawk Recurve Bow! It's a 14 strand endless loop Dacron string.
I cut ✂️ a piece of paracord 3" long. Then, I use that piece to measure cutting 7 more for a total of 8, four three inch pieces for each side of the string. I removed the inner string strands of string from the paracord, so only the sheath remained. I then tied bundles of 4 paracord sheaths together in the middle with a 6" piece of dental floss.
I separated the strands to find 7 on each side, then put the paracord bundle in the middle, where I measured 9 3/8" from the ends of the string loop. I then used the ends of the dental floss to tie the bundle to the bow string.
After I restrung the bow, I made sure that the paracord bundles were even on each side of the string. Then, I tied the dental floss around the whole string a couple of times. The dental floss will help to hold the paracord in place so it won't fall out!
#archery #traditionalarchery #bowstring #silencersound #tradbow #string #diy
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: