DIY Solder Fume Extractor

Описание: Solder fume contains Flux which burns and it is harmful for our lungs and also causes irritation in the eyes. Soldering for long hours can be a health hazard when not done with proper equipment

In this video i have shown how to make a DIY Solder Fume Extractor or Sucker to extract the harmful fumes coming out of the solder wire when you are soldering.

this solder fume extractor can extract away harmful fumes from solder which can prevent the fumes from entering our body through breathing or through the eyes. it also has a carbon filter to filter the fumes coming out

the project is very easy to make. just 3d print the files and the electronics is very simple. i have used a 12v CPU fan of 80mm side length. i have powered it using a 3.7V Lithium ion battery. to step up the voltage to 12 volt i have used an MT3608 boost step up module. i have also added a TP4056 battery charger module.

Links:

STL: https://bit.ly/3r4f2qT

Buy Links:

80mm CPU Fan: https://bit.ly/3f50C4j
NCR18650B Battery: https://bit.ly/3HLtqeD
MT3608 Module: https://bit.ly/3Fb1b7x
TP4056 Module: https://bit.ly/3JYauvc
Battery Contact: https://bit.ly/3q5CvZI

M3x12 screw
M4x40 screw


#DIY #Solder #FumeSucker