Honeywell Electric Radiator Heater HZ717 - How to Use
Автор: Honeywell Plugged In
Загружено: 2019-05-15
Просмотров: 39652
Описание:
Learn more about the Honeywell HZ-717 Electric Radiator Heater.
If you have questions, please reach out to our Consumer Relations team by emailing us at [email protected]. We are here to help!
This heater requires some assembly. Attach the wheel base to the bottom of the heater with the included u-bolts and wing nuts before operating.
It is important that the wheels are attached to the bottom of the heater.
This heater creates convection heating by passing warm oil inside sealed metal columns it is a quiet gradual heating. As the heater warms up, the oil may naturally expand and make a slight
ticking sound this is normal and will stop once the oil has reached an optimal temperature. First make sure the heater is plugged in. This heater has 2 constant heat modes or you can set the thermostat to 4 preset comfort settings. Turn the heater on by pressing the power button. The heater will always start in the high constant heat mode where high will blink and display three times on high. The heat will remain on maximum power of 1500 watts. The heater will then display the current temperature in your room. The current temperature will be displayed in solid green and remain displayed until you change the setting. In this instance the current room temperature is 76 degrees. To change the setting to low where the heat will operate at 900 watts press the set button once until low blinks in the display. To use the thermostat and choose your desired comfort setting press the set button to choose 65 70 75 or 80 degrees. The chosen desired temperature will blink three times and display and then the current room temperature will display.
This heater is equipped with many safety features, one being a tip over switch which disables the
heater if tipped in any direction. Make sure you are not tipping the heater while using the settings or the heater will remain off. To use the timer function press the timer button and choose 2 4 8 or 12 hours. This heater will run for that chosen period and automatically shut off after desired time passes.
For more information on Honeywell Heaters visit HoneywellPluggedIn.com.
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке: