Piper Seneca II RC Plane Build and Fly

Описание: Piper Seneca was once on my wish-list, finally I can get my hand on this type of aircraft. At first I already planned to make Piper Seminole but I thought its T-tail will bring a hard time to build. So to make simple but scale model I choose Seneca II and the end result is surprisingly easy to build. The wing is very similar than the Cherokee that I already built and flown. The performance also very similar to the Cherokee, but with more powerful thrust with twin motors. In this project also the first time I ever use motor for quad/ drone race.

SUBSCRIBE and Like to support this channel
#rcplane #rcpiper #rcseneca #buildvideo #seneca #piper

You can download the plans on the link below :
A4 Plans : https://paper-replika.com/RCplans/PR_...
A0 Plans : https://paper-replika.com/RCplans/PR_...
A3 Decal : https://paper-replika.com/RCplans/Sen...

Build instructions :
https://paper-replika.com/index.php/r...

DONATE via Paypal : [email protected]

Join this channel to get access to perks:
   / @juliusperdana  

Playlist :
00:00 Opening
02:21 Plan Preparation
02:52 Fuselage
10:34 Wing
15:09 Stabilizers
17:44 Wing Mounting
19:17 Electronics #1
21:34 Covering
26:15 Electronics #2
27:45 Cabin Glass Windows
30:47 Color Scheme and Decal
33:28 Landing Gear
35:15 Finishing
40:02 Maiden Flight
50:46 Review

Specs :
1. Wingspan 1200mm / 47.2 inches
2. Flying weight : 900 grams/ 31.7 oz
3. Wing loading : 43 gram/dm2 - 14.1 oz/sq.ft.
4. Wing cube loading : 9.4
5. Wing Area : 20.9 dm2 / 324 sq.in.
6. CG : 3.5 cm

Electronics
2305 2300-2700kv brushless motor with 6 inch 3 blade propeller (x2)
BLHeli 30A ESC (x2)
Battery Lipo 3S 2200mah / Li-on 3000mah
4 plastic gear 9 gram servos (micro servo) https://amzn.to/2X5GdXH

Materials :
1. 5mm Depron/ Polyfoam
2. 3mm + 7mm Plywood
4. 0.3mm + 0.5mm Mica Plastic
5. hot glue, UHU glue, CA glue
6. packing tapes https://amzn.to/3ttYTMp
7. laminating film https://amzn.to/3leCsqK