Modifying a Case FarmAll 75C to Use Skid Steer Attachments on a 3 pt Hitch - Part 1

Описание: UPDATE 1-6-2022: I don't recommend Titan's 3pt to Quick Tach, after using several quick tach skidsteer attachments I have had them pop off several times. The main issues is the pins that lock the skidsteer attachments to the adapter plate are too short and when pulling attachments (ie Open 4 in 1 bucket used for dragging), the attachments will pull off. Maybe something with longer pins would work...?

Original:

I really want to use my skid steer attachments on the back of my Case FarmAll 75C utility tractor. I have had this desire to give my tractor a skidsteer mullet (tractor up front, skid steer in the back) ever since I bought it, in particular I really really want to use my 4 in 1 bucket on the tractor. The 4 in 1 bucket is a perfect attachment for the back of the tractor.

The limited range of motion of a 3-point hitch make the 4 in 1 a good fit because it can pick up loads and dump them without needing to fully tilt forward. In addition, the bucket will act as ballast, a carry all, dozer blade, box blade, post puller, tree puller and more.

This modification wasn’t as easy as I had hoped and I still need to make some tweaks. The 3 pt to universal quick tach adapter has some limitations and needs a good range of motion on your hydraulic top link. I had to fabricate an extension to the adapter to help tilt the hitch more towards the back. This is part 1 of a two-part series on upgrading my 75C to handle skid steer attachments.

If you have tried this and have any tips, or any feedback in general let me know in the comments below!

Subscribe if you like tractors, skid steers, and/or mullets!

driftlessinwi

Case FarmAll 75C and 75A