CNC G0704 Part 4 - Y Axis Installation
Автор: n1bpd
Загружено: 2012-12-09
Просмотров: 199942
Описание:
Installation of BD Tools Y Axis. I was going to have the X,Y and Z be in one video, but this turned out to be 20 minutes long so I split it.
I forgot to ask for flats on my ballscrews so I milled those myself. The grinding is a little rough for the X Ballnut recess but I plan on buying a new saddle and using the CNC'd mill to mill the recess on that along with oiling channels.
The ball nut transfer tube is just a strip of printer paper that was wrapped around a sharpie until it was the right outside diameter. I covered it in shipping tape to make it a bit stronger.
I'm using 3/8" Bore Lovejoy L-050 Couplers with Spider Tighteners instead of Oldham due to cost ($35 vs $135). I've used L050 in the past with good results so figured it wasnt worth the extra $100, may change my mind later.
Rapid's at the end are 120IPM followed by 250IPM
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
