Nürburgring Nordschleife Mazda RX-7 FD3S onboard

Описание: Touristenfahrten 17.04.2015 ride a fun lap onboard with me...
didnt drive the track for almost 2 years, this is my 4th lap of the week.the damping setup was not finished by that time.
i was messing around a bit,due to the traffic there was no possibility to do a good lap.
but i think it shows the potential of the car quite good.
specs:
engine rebuilt by Hayward Rotary in April 2011 (about 27000km now)
Apexi Power FC with Commander
Garrett T04E Single Turbo
HKS Mushroom Air Filter
HKS Cast Manifold
HKS 3" Down Pipe
50mm external HKS Wastegate plumbed back into Downpipe
complete 3" catless exhaust with resonator and muffler
walbro intank fuel pump (255l/h)
550cc Primary Injectors
1680cc Secondary Injectors
KG Parts Fuel Rail
Fuel Pressure Regulator
Air Pump Removed & a/c removed & spare wheel removed
battery relocated in the trunk
big radiator and big intercooler v-mount
custom power steering cooling pipe
Polished Lower Inlet Manifold
modified greddy elbow and custom intake piping
modified Blitz SS BOV
Engine Damper
Exedy Stage2 Clutch (fitted 2010!!)
re amemiya ignition amplifier
NGK BR10EIX plugs
magnecor competition plug wires
still no boost controller (about to come)
peak boost around 0.9 bar / hold boost around 0.8 bar (should be close to 350 bhp and about 400nm of torque)
almost complete pu bushes all round
megan racing toe ends in the front / megan racing toe arms in the back
XYZ racing spec coilovers (spring rate 20kg front and rear)
ST suspension sway bars
improved racing sway bar links
setup (wheel alignment and height adjustment on a wheel scale) done by Raeder Motorsport
yokohama advan AD08R tyres (235/45/17 front & 255/40/17 back) on buddy club p1 racing wheels
stock 4 pot calipers with CL RC6 pads and dba 4000 series 6x6 wiper slot discs in the front. (i used 1 and a half set of pads in 10 laps!!)...need something better
ebc 307+ racing brake fluid & braided steel lines
yellow stuff pads and hawk discs in the back
oil temperature/pressure gauges
innovate wideband lambda control with afr gauge
checked 1295 kg with a full tank of gas and me sitting in it (!)
i still have probably forgotten some things...