Flightline OV-10 Bronco: Test Flight w/ Upgraded Power System

Описание: This flight was my first with the upgraded power
system. I found the stock OV-10's thrust to be anemic,
so I put in some 3548 900kv motors, upgraded the
props to 11x7 3-blade Master Airscrew and designed
and printed new spinners that can accommodate the
new motor and prop shaft.

Overall, I am very happy with the results. My flight
times are still around 7minutes long with 4000mah 4S
packs, but the performance of the plane is where I
want it (and where it should have been from the
factory IMO).

Here is a thread on RCGroups you can follow for additional information:
https://www.rcgroups.com/forums/showt...

The motors I used are the FLASH HOBBY Brushless Motor D3548 900KV Outrunner Motor:
https://a.co/jdZbUtE

I swapped out the stock props for slightly large 3-Blade - 11x7 Propeller by Master Air Screw:
https://www.masterairscrew.com/produc...

I also upgraded the ESCs with some 60A units I had in my toolbox. Overkill for sure, but it's what I had on hand.

Lastly, I designed and 3D printed new spinner specifically to fit the standoff distance of these new motors and allow the use of a different motor/prop shaft than the stock setup. This will be posted to my Thingiverse page soon.
www.thingiverse.com/shadowvfx