Software List for Electrical Freshers | Power, Electronics, Controls | Job के लिए क्या सीखें?

Описание: Getting your first job as an electrical engineer is tough. In this video, we break down the ultimate software list you need to learn for Power Systems, Electronics, and Control engineering to get hired...

here are the Project Ideas
1For Power Systems Engineers (using ETAP, MATLAB, PSS®E):

2.Model and simulate a solar PV farm connecting to the main grid, analyzing fault currents and protection coordination.

3.Perform a load flow analysis for a small industrial plant and design the capacitor bank placement for power factor correction.

4.Design the protection scheme (relay coordination) for a distribution feeder using ETAP.

5.Simulate and analyze the transient stability of a power system following a fault event (e.g., a downed transmission line).

6.Model a microgrid with diesel generators and battery storage and develop a simple control strategy for islanded operation.

7.Create a harmonic analysis study for a data center load and design a passive harmonic filter.

8.Design the single-line diagram and protection for a residential substation using AutoCAD Electrical.

9.Simulate an induction motor starting and analyze its impact on the voltage profile of a local bus.

10.Develop an economic dispatch model for a system with multiple generators using MATLAB.

11. Model an HVDC transmission link and analyze its performance during AC grid faults.

For Electronics & PCB Engineers (using KiCad/Altium, LTspice, Python):

1.Design, simulate, and order a PCB for a Bluetooth-controlled smart relay.

2.Build a programmable DC power supply with current limiting and a digital display.

3.Create a Raspberry Pi / Arduino shield with sensor inputs (temperature, humidity) and a custom PCB.

4.Design a high-speed digital PCB for an FPGA board, focusing on impedance matching and signal integrity.

5.Simulate and build an audio amplifier circuit, analyzing its frequency response and THD in LTspice.

6.Develop a PCB for a drone flight controller, integrating IMU and gyroscope sensors.

7.Design a switch-mode power supply (SMPS - Buck Converter) and simulate its performance under different loads.

8.Create a wearable device PCB with a low-power Bluetooth module and battery management.

9.Simulate and layout a RF filter circuit for a specific frequency band (e.g., 2.4GHz WiFi).

10.Reverse-engineer a simple commercial product's circuit and re-create its schematic and PCB layout.

For Control & Automation Engineers (using PLC Ladder Logic, Python, SCADA):

1.Program a virtual traffic light control system with a pedestrian crossing button using Siemens TIA Portal or CODESYS.

2.Design a SCADA dashboard (using Ignition or similar) to monitor and control a virtual water tank level process.

3.Program a conveyor belt sorting system with multiple sensors (color, metal detection) and actuators using a PLC.

4.Implement a PID controller in a PLC (or Python) to control the temperature of an oven simulation.

5.Build a project for industrial IoT (IIoT) by connecting a sensor to a PLC and sending data to the cloud (MQTT/Node-RED).

6.Program a multi-axis pick-and-place robot simulation for a production line.

7.Design a state-based control system for an elevator with multiple floors and car call buttons.

8.Create a safety instrumented system (SIS) for a process, implementing an emergency shutdown (ESD) logic.

9.Develop a machine learning model in Python to predict machine failure from simulated vibration sensor data.

10.Program a batch process for a mixing tank, controlling valves and pumps based on timers and recipes.


MUST Learn: Non-negotiable fundamentals.
HIGHLY Recommended: Industry-standard tools that make you stand out.
NICHE but Powerful: Specialized tools for specific, advanced roles.
This is the core of the video. We break down the essential software for each specialization:
The Universal Skill: Why MATLAB & Simulink is mandatory for everyone.
Power Systems Engineer: ETAP, AutoCAD Electrical, PSS®E.
Electronics & PCB Design Engineer: KiCad/Altium, LTspice, Cadence OrCAD.
Control & Automation Engineer: PLC Platforms (Siemens/Rockwell), Python, SCADA Software.
Your Actionable 3-Step Plan: We give you a simple, step-by-step plan to stop learning and start doing.


💬 Join the Conversation!
Let me know in the comments:

Which path are you choosing: Power, Electronics, or Controls?

What project are you going to start building first?

#eee engineering #electricalengineers #softwareengineer #skills