How to expose and develop a screen step by step with Douglas Grigar

Описание: In this video Douglas Grigar takes you step-by-step through preparing a screen. It starts with a brief demo of aligning your artwork and transferring the film positive to the screen. This is followed by transferring the screen to the exposure unit and we then break down the washout procedure into steps. Throughout Doug gives you hints and tips on best practice, so try not to skip forward, but if you are in a rush...

0:26 Step 1: Align artwork
0:46 Step 2: Transfer film positive to screen
2:28 Step 3: Transfer screen to exposure unit
3:03 Step 4: Expose
3:18 Step 5: Remove positive from screen
4:00 Step 6: Pre-wet screen with low pressure
4:19 Step 7: Allow emulsion to break up
5:16 Step 8: High pressure wash
6:01 Step 9: Low pressure rinse
6:54 Step 10: Dry screen

If you have any questions, please comment below and do tell us whether you have found this video helpful.


🔴 SUBSCRIBE:
For more helpful tips and advice - http://bit.ly/2m9Rt2l

🔴 SIGN-UP: For our newsletter to be notified of new videos, helpful blog posts, upcoming training classes and more - http://bit.ly/2kDX8Ny

🔴 Questions: Please ask in the comments area, we are happy to help.

🔴 Share: If you have friends that could benefit from this information, please share

🔴 Follow Us:

✅ Facebook - http://bit.ly/2kuooOM

✅ Twitter - http://bit.ly/2kDUGXm

✅ LinkedIn - http://bit.ly/2lLKlsH


🔴 Training: We offer training classes in association with Master Screen Printer, Douglas Grigar. Sign-up for our newsletter at our website to be kept up to date about new classes, helpful articles on our blog and videos like this one.