How to fix printer canon G2010 error P22 error only scanner 99% check cable

Описание: what's happened for printer canon G2010, G3411, G2411, G2010, G3010 error P22 EP1
how to fix p22 error in Canon G3411, G2411, G2010, G3010
Canon error blink P22 as error only scanner 99% check cable

The "P22" error code on a Canon G2010 printer typically indicates a problem related to the printer’s ink system or ink tank setup. Here are some steps you can take to resolve this issue:

Check Ink Tanks:

Make sure that all ink tanks are properly installed. Remove and reinstall each tank to ensure they are seated correctly.
Verify Ink Levels:

Ensure that none of the ink tanks are empty. Refill or replace any empty tanks as needed.
Clean Ink Tank Contacts:

Turn off the printer and unplug it from the power source.
Open the printer cover to access the ink tanks.
Check the contacts on the ink tanks and inside the printer. Gently clean them with a lint-free cloth or a soft brush to remove any dust or ink residue.
Reset the Printer:

Sometimes, resetting the printer can clear error codes. Turn off the printer, unplug it from the power source, wait for about 10 seconds, and then plug it back in and turn it on.
Check for Obstructions:

Ensure there are no paper jams or obstructions inside the printer that could affect its operation.
Update Printer Firmware:

Check Canon's website for any firmware updates for your printer model and apply them if available. Sometimes, firmware updates can resolve error codes.
Perform a Printer Head Cleaning:

Use the printer's maintenance function to perform a cleaning cycle. This can help if the issue is related to clogged print heads.