How To: Install a Manual Bilge in YOUR ST3 SEADOO NO DRILL!!

Описание: Welcome back the YEWWWTOOOB. In today’s episode I show you how to install a manual bilge in your ST3 style Seadoo. Mine is a 2024 Seadoo Explorer Pro 230. Your model is important for install. A 170 will allow for much more room in the back of the engine compartment to mount your bilge. If you do not have a Garmin setup (Explorer Pro and Fish Pro) you will not be able to mount the switch where I did. Unless you have upgraded your own Seadoo with the Garmin setup. This is because I mounted my switch on the mirror adapter from Seadoo. In a perfect world I would like to get my bilge a bit lower into the hull, but room is extremely tight on the supercharged motors.

The items I used are linked below. Please use a waterproof switch if you decide to mount your bilge switch where I did. It is not in the video but ensure you use a fuse in your wire connection for the positive lead heading to the switch.

Wire Loom (Nice and stiff to push through the vent tube)
https://a.co/d/cHXAvCC

RULE Bilge
https://a.co/d/cHXAvCC

Blowsion Switch
https://blowsion.com/products/bilge-s...

Blowsion Bilge Tubing
https://blowsion.com/products/bilge-p...

NRG Creative Bilge outlet
https://nrg-creative-llc.square.site/...

Bullet Connectors
https://a.co/d/cHXAvCC

Please install at your own risk. Thank you for watching and I hope I can help someone. It took me a lot of research and understanding of this hull and how it comes apart and my hope is I can pass the knowledge on.

If you are into Harley stuff, I have tons of videos on that too! Please Subscribe if you enjoyed the video. Thank you -G