How to Replace Front CV Axle Assembly 2007-2013 Acura MDX

Описание: Buy Now!
New CV Axle Assembly from 1AAuto.com https://trq.video/ic-1AACV00398

This video shows you how to install a front CV axle assembly on your 2007-2013 Acura MDX. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This repair was done on a 2008 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oaZ9-1AXAA00013
• Pry Bar https://trq.video/oH7-1AXAA00020
• 19mm Wrench https://trq.video/oKZ-1AXAA00010
• Dead Blow Hammer
• Bent Nose Pliers
• Ratchet https://trq.video/obeF-1AXAA00016
• Hammer
• Pick https://trq.video/oDT-1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Acura MDX 2nd Generation 2007-2013:    • Acura MDX 2nd Generation 2007-2013  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.