Ski-Doo P-Drive and QRS Clutches - Building the Dirt Cheap Spring Compressor Tool

Описание: In this video we show you the tools and parts needed to build a spring compressor to service the primary and secondary clutches in Gen4 and Gen5 Ski-Doo snowmobiles.

Part numbers for the expansion plug: Dorman 570-008 (this is Dorman's part number for a 5 pack), Dorman 02602 (one item on a card), Hillman 58252, Midwest Fastener 84033, Napa NOE 570008, Napa Canada PAP 263588, Napa Canada OES 570008, Papco (Canada) 263-588, Canadian Tire 017-6481-0
*Users have commented that some are a 1 1/4" ID and not 1 3/8" ID. Please double check the inside diameter of your QRS shaft. 1 1/4" might be unique to the "Fixed Flange Assembly" used in four stroke models.
417127689 - 1 1/4" - Used in 900 ACE Turbo and 900 ACE Turbo R from 2020 on.
417127595 - 1 3/8" - Used in 600R ETEC, 850 ETEC and 850 ETEC Turbo R from 2019 on.
417127632 - 1 3/8" - Used in 600 EFI, 600 ETEC, 600R ETEC from 2019 on.

Menards SKU's:
202-8214 - 1 3/8" Plug (Midwest Fastener 84033)
689-1970 - 2" Schedule 40 PVC Cap (Nibco F01930D)
228-9252 - 5/16-18 x 12" threaded rod (Hillman 11012)
202-0033 - M5-0.8 x 30mm Socket Head Cap Screw (Midwest Fastener 81667)
232-1017 - 5/16-18 Nuts (bag of 11 but you only need 3)
232-3986 - 5/16 Washers (bag of 12 but you only need 1)

00:00 - Intro
00:15 - Failed spider assembly
00:45 - Overview
01:04 - Tools needed
01:54 - Parts needed
02:20 - 1 3/8" auto marine plug
04:35 - Building threaded rod
05:10 - Assembling threaded rod and plug
06:00 - Building PVC Cap step 1
06:31 - Assembling tool for QRS use only
06:45 - Building PVC Cap step 2