How to setup Modbus RS485 Communication of Fluidwell products - Part 1
Автор: Fluidwell BV
Загружено: 2021-10-18
Просмотров: 17848
Описание:
Learn in 8 minutes, how to install and test a Fluidwell product with Modbus on an RS485 2-wire serial communication network. We will describe the following actions on the F103 Flow Logger and Totalizer:
• Communication bus specifications
• Wiring the RS485 2-wire Serial Communication
• Connection with Remote Configuration Cable
• Connection setup of the Modbus Master
• Fluidwell device Settings
Set the Modbus communication speed.
Set the bus address of your device.
Set the Modbus communication mode.
Set the number of data bits.
Set the parity mode.
• Test the connection.
All Fluidwell products are Modbus slave devices.
Chapters:
00:00 Intro
00:57 Communication bus specifications
01:27 Wiring the RS485 2-wire Serial communication
01:50 Connection with Remote Configuration Cable
02:10 Connection setup of the Modbus Master
02:55 Fluidwell device settings
03:15 Set the Modbus communication speed
03:58 Set the bus address of your device
04:38 Set the Modbus communication mode
05:08 Set the number of data bits
05:40 Set the parity mode
06:19 Test the connection
07:49 Outro
Повторяем попытку...
Доступные форматы для скачивания:
Скачать видео
-
Информация по загрузке:
![RS-485 [RS Elektronika] #62](https://image.4k-video.ru/id-video/0M2ZljGHO6Y)
