Floating Riser Install on an Arcade1up Cab

Описание: This video is an overview and tutorial on how I created a floating riser for my Arcade1up cabinets. The original intent of this mod was to increase the height of my risers and get the bottom of the risers off of the carpet. I tend to move my cabinets around and I wanted to protect the artwork. At the same time, this proved to be a good opportunity to add a unique lighting effect to the cabs as well.

Chapters:
Intro & Parts/Tool List – 0:00
Modifying the Riser – 0:59
Building the Riser Floor – 2:20
Installing the Floor – 3:58
Installing the LEDs – 4:42
Power & LED Controller – 6:23
Demo & Wrap Up – 7:27

Have questions or need help with your own mod? Or even just to chat. Jump on discord!   / discord  

Hardware :
LED Kit (if not available, look for a color changing 16.4ft (or less) kit with WIFI enabled app control): https://www.amazon.com/gp/product/B07...

Leg Levelers: https://www.amazon.com/gp/product/B01...

Plywood: use any scrap you might have around or try this (note a 2' x 4' sheet from a big box store can support two cabs for this mod) - https://www.lowes.com/pd/1-2-in-Commo...

Screws (Buy a smaller kit if you can find it as you only need four screws total. If you have 1.5" length or greater #8 or #6 screws...they will likely get the job done): https://www.lowes.com/pd/Power-Pro-8-...

Uses for scrap rP panel material from this mod has been used in my coin door install also for my a1up cabs:    • Arcade1up Functional Coin Door Install on ...  

See my other videos over on my channel:    / @9scorpions