3D Printed Raspberry Pi Robot Build – Part 4: Motor Control Board

Описание: In Part 4 of this Raspberry Pi robot build, we assemble and mount the motor control board for the robot body.

Everything is mounted on a 4" x 8" piece of basswood and mounted to the robot’s main body frame to create a compact and organized power and motor control system.

This project is a 3D printable Raspberry Pi robot, although the body frame can also be built using metal rails or other materials. Later parts will include 3D printed arms and a robot head, along with full Raspberry Pi control.

If you're interested in robotics, Raspberry Pi projects, electronics, and DIY robot builds, follow along with the series.

Parts Used

L298N motor drivers (×2) https://amzn.to/46MEszg

ESC modules (×2) https://amzn.to/4u8k6dT

12V–5V buck converter https://amzn.to/4cBFTUZ

terminal blocks https://amzn.to/4b64BdA

mounting hardware https://amzn.to/40eRH85

Basswood https://amzn.to/3PjiEVO

Wire https://amzn.to/3P2Uu1I

Connectors https://amzn.to/4rgDPVZ

#robotics #raspberrypi #diyrobot #3dprintedrobot #raspberrypiprojects #electronics #ArtificialIntelligence #Robotics #TechInnovation #arduino
Affiliate disclaimer:
Some links are affiliate links; I may earn a small commission at no extra cost.