How to rebuild the front suspension on your 2007-2013 Tahoe or Silverado!

Описание: This is how to complete a front suspension rebuild for any GMT900 1500 series 2wd vehicle. The only components we did not replace were hubs and inner tie rods. Parts used listed below along with all vehicles this applies to.

Like/subscribe and check out other projects on our channel! Thanks!
--------------------------------------------
Vehicles this video applies to:
2007-2014 Tahoe, Suburban, Yukon, Yukon XL 1500 series 2wd
2007-2013 Silverado and Sierra 1500 2wd
The same principals apply for 4wd, but this video does not show axle shaft removal/replacement.
--------------------------------------------
Parts used in this video:
Driver Side Upper Control Arm: https://a.co/d/10MO2vh
Passenger Side Upper Control Arm: https://a.co/d/6UMAPrX
Lower Ball Joints (need 2): https://a.co/d/7gp5zFy
If you prefer to purchase the entire lower control arm, these are good options: https://a.co/d/cb6qk5j https://a.co/d/7otT23x
Tie Rods (need 2): https://a.co/d/2LxeTsx
Struts (need 2): https://a.co/d/27godiy
Pads/Rotors: https://a.co/d/4nBtvzR
Sway Bar Bushings: https://a.co/d/aF31daK
Parts we didn't replace, but might be needed:
Inner Tie Rods (need 2): https://a.co/d/fThUaki
Hubs (need 2): https://a.co/d/4kAm3X4
--------------------------------------------
Skip to the section you need:
00:00 Intro
00:37 Tool List
00:51 Applicable Vehicles
02:05 Brake System Removal
07:06 Sway Bar End Link Removal
07:28 Tie Rod and Ball Joint Separation
09:27 Knuckle/Spindle Removal
10:47 Strut Removal
11:51 Upper Control Arm Removal
13:29 Tie Rod End Replacement
15:50 Lower Control Arm Removal
17:04 Lower Ball Joint Replacement
19:39 Lower Control Arm Install
20:47 Upper Control Arm Install
22:36 Strut Install
24:01 Knuckle/Spindle Install
26:37 Brake System Install
31:23 Sway Bar End Link Install
33:05 Last Things to Check
34:04 Outro - Thanks for Watching!
--------------------------------------------
Check out some of our other videos!

Shop Day Fixing Our Firebird's Brakes:
   • SHOP DAY - Fixing 1967 Firebird Brakes and...  

How we built a $300 1968 Mustang to race Duct Tape Drags!
   • How we built a $300 1968 Mustang to race D...  
--------------------------------------------
👉 Want to follow us on Instagram? Click here:   / burlybuilds  

#burlybuilds #gmt900 #suspension #suspensionrepair #tahoe #silverado #sierra #suburban #escalade #yukon #yukonxl #brakes #balljoint #mechanic #shocks #diy