🚨JRAHK MUST-DO Steps Before Testing 48-72V/80A E-bike Controller Systems | Safety Guide 🚨

Описание: YouTube Video Description Suggestion:

🚨JRAHK MUST-DO Steps Before Testing 48-72V/80A E-bike Controller Systems | Safety Guide 🚨

Testing your E-bike system? This test uses a 60V battery and a BMS (Battery Management System) with 100A continuous current. Follow these critical steps BEFORE powering on to ensure safety!

🔧 ESSENTIAL CONNECTIONS:

Motor Circuits - Connect to the controller.

Battery Circuits - Connect to the BMS/controller.

Keyswitch Circuit - If your E-bike has no physical keyswitch, short or connect the circuit AS SHOWN IN THE VIDEO.

Throttle Circuit - Connect to the controller.

⚠️ CRITICAL SAFETY STEPS:

The motor MUST BE LIFTED OFF THE GROUND (suspended) BEFORE turning on the power! This prevents accidental startup causing injury or damage.

‼️ KEY WARNING:

NEVER OPERATE THE THROTTLE DRIVE WITHOUT THE LEARNING LINE CONNECTED! Using the throttle without the learning line connected can cause erratic system behavior, uncontrolled movement (runaway), or severe damage to components. ALWAYS connect the learning line correctly - refer to your controller manual or the video demonstration.

Double-check ALL connections and conditions before starting your test! SAFETY FIRST!

#Electric bike #BMS #JRAHK Controller#E-bike Controller#60VBattery #100A #LearningLine #Controller Setup#Electric bike Controller