How to Install a Short Chambered Barrel Presented by Larry Potterfield | MidwayUSA Gunsmithing

Автор: MidwayUSA

Загружено: 2013-08-12

Просмотров: 463401

Описание: Installing a new barrel on a Remington 700 is a lot easier than it used to be. Using a pre-threaded and short chambered barrel by Shilen, this job is easily accomplished by hand using only an action wrench, barrel vise, finish reamer, T-handle, and some headspace gages. Watch along as Larry Potterfield, Founder and CEO of MidwayUSA, installs the barrel and lengthens the chamber to final dimension.

For this and other MidwayUSA videos visit the MidwayUSA Video Library:
https://www.midwayusa.com/video-library

Не удается загрузить Youtube-плеер. Проверьте блокировку Youtube в вашей сети.
Повторяем попытку...

How to Install a Short Chambered Barrel Presented by Larry Potterfield | MidwayUSA Gunsmithing

Доступные форматы для скачивания:

Скачать видео

Информация по загрузке:

Скачать аудио

Похожие видео

Как собрать Remington 700. Презентация Ларри Поттерфилда | MidwayUSA Gunsmmithing

Как собрать Remington 700. Презентация Ларри Поттерфилда | MidwayUSA Gunsmmithing

Rebarrelling a Remington 700 with a Criterion

Rebarrelling a Remington 700 with a Criterion "Remage" Pre-fit

Removing a Tikka Factory Barrel

Removing a Tikka Factory Barrel

How to Install a Three-Position Safety on a Remington 700 | MidwayUSA Gunsmithing

How to Install a Three-Position Safety on a Remington 700 | MidwayUSA Gunsmithing

Blueprinting a Remington 700 Presented by Larry Potterfield | MidwayUSA Gunsmithing

Blueprinting a Remington 700 Presented by Larry Potterfield | MidwayUSA Gunsmithing

AR-15 Fitting a Barrel Extension to a barrel

AR-15 Fitting a Barrel Extension to a barrel

Building a Pattern Stock Presented by Larry Potterfield | MidwayUSA Gunsmithing

Building a Pattern Stock Presented by Larry Potterfield | MidwayUSA Gunsmithing

Как установить двойную гильзу на затвор винтовки Remington 700 Bolt Action | Оружейное дело

Как установить двойную гильзу на затвор винтовки Remington 700 Bolt Action | Оружейное дело

Ввод канала ствола — изготовление приклада для военной винтовки, часть 2

Ввод канала ствола — изготовление приклада для военной винтовки, часть 2

**How to Install a Prefit Barrel** Preferred Barrel Blanks Headspace and Torque Barrel Nut Prefits

**How to Install a Prefit Barrel** Preferred Barrel Blanks Headspace and Torque Barrel Nut Prefits

Как сделать нарезы ствола из старых стальных болтов

Как сделать нарезы ствола из старых стальных болтов

Making a Gunsmith Lathe Barrel Spider (and threading for a suppressor).

Making a Gunsmith Lathe Barrel Spider (and threading for a suppressor).

Part one of Re-barrelling a K98 Mauser

Part one of Re-barrelling a K98 Mauser

Как украсить затвор винтовки драгоценными камнями — Turnbull Custom Guns

Как украсить затвор винтовки драгоценными камнями — Turnbull Custom Guns

Remington 700 Action Truing Overview

Remington 700 Action Truing Overview

Remington 700 270 Project Action and Bolt truing. Part 2

Remington 700 270 Project Action and Bolt truing. Part 2

HOW TO MAKE A CUSTOM GUNSTOCK - .375 H&H

HOW TO MAKE A CUSTOM GUNSTOCK - .375 H&H

DIY Remington 700 Barrel Upgrade | Carbon Barrel Install - Ep.1 | SMART Tips & Tricks

DIY Remington 700 Barrel Upgrade | Carbon Barrel Install - Ep.1 | SMART Tips & Tricks

Chambering a new barrel for the wife's rifle (PT 2). 6.5 Creedmoor

Chambering a new barrel for the wife's rifle (PT 2). 6.5 Creedmoor

Rebarreling a Yugoslav M48A Mauser in .308

Rebarreling a Yugoslav M48A Mauser in .308