DIY Tech Tip: How to Install Thin-X LIN Strobe Light in Truck Badges

Описание: **The products featured in this video will be linked in the description below. This video shows a demonstration about how to remove your truck badge, install the Thin-X LIN Series light, and display the badge lighting effect that we use in many of our builds.

The tools that we use for this installation include:
Plastic pry bars
Long pick set
Drill with a unibit and a long extension
Thin-X LIN Series LED

First, we use the plastic pry bars to begin pulling the badge. We use the pick set to help release the metal clips that hold the badge in place on the truck. Once you have your badge removed, you will drill a hole in the middle for the Thin-X wires. You can mount the light using the included screws. We like to add a small piece of plastic for additional reinforcement where the screws come through on the back of the badge.

Once the Thin-X is attached to the badge, you will need to run your wires, and re-attach your badge to the truck. Watch the video for more detailed information about this installation including how we remove the badge, where to drill for the wires, and where to run your wiring.

For more information about our Thin-X LIN Series LED strobe light, please visit www.WickedWarnings.com. If you have any questions about this product, send us an email at [email protected].

Be Seen & Be Safe!

Product Featured:
Thin-X LIN - https://www.wickedwarnings.com/produc...

Contact Us:
[email protected]
https://www.wickedwarnings.com

Follow Wicked Warnings:
  / wickedwarnings  
  / wickedwarnings  
And remember to subscribe to our YouTube Channel to see our latest builds!