DIY Crystal Snowflake Necklace | Cat Fox Designs

Описание: Snowflakes are like diamonds in the sky, so why shine bright like one of those diamonds and feature it in a necklace? Large crystal beads are suspended on two chains with a sparkling Swarovski crystal snowflake at the side for asymmetrical appeal.

▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Materials:
A crystal snowflake (I am using a Swarovski 62027 silver-plated snowflake I purchased from Artbeads.com)
(11) 10mm round faceted crystal beads
A toggle clasp
(11) eye pins
1/2" of cable chain
(6) jump rings
Chain of your choice (I am using a chain called "Silver-plated Large Oval Link Chain" I purchased from Artbeads.com)
Tools: Long nose pliers, wire cutters, round nose pliers, and a ruler
Instructions:
1.) Slide a bead onto an eye pin. Form a loop and cut any excess wire. I can generally tell how much wire is needed to form a proper loop, so I usually just trim the excess wire prior to forming the loop. I find it easier that way.
2.) Repeat last step until you have all the beads on eye pins.
3.) Now it's time to form a beaded chain. First, open an eye pin loop. Then attach another beaded eye pin loop and close the loop. Continue like this to form a beaded chain. You will need to make two separate chains: one that has five beaded eye pin links and one that has six beaded eye pin links.
4.) Open a jump ring and attach it to one of the holes in the snowflake and the short beaded chain. Close the jump ring. Open another jump ring and attach it to the next hole below the previous one you attached the short beaded chain to and then attach the long beaded chain. Close the jump ring. Attach the 1/2" of cable chain to the eye pin loop on the opposite side of the long beaded chain.
5.) To find the lengths of chain you'll need, you first need to measure the snowflake and the shortest beaded chain. Mine turned out to be about 4". You could also measure your clasp and any jump rings for more accurate finished measurements, but I will skip that part. Approximate measures, for me, are just fine. So I want a necklace that would be approximately 19" long when finished. So 19 -- 4 = 15. I need two chains, one for either side of the snowflake and beaded chain, so I will just divide 15 by half and I come out with two 7-1/2" of chain I will need. Here's a tip: For accurate measurement of your chain, first measure out your chain with a ruler. Then for the second length of chain, count how many links are on the measured chain and go by that. Sometimes when measuring with a ruler, you will add or subtract a few links and this will show up on your design.
6.) Now that you are done measuring and cutting your chain, you will need to piece everything together. To do this, just open a jump ring, attach one length of chain, and attach both beaded chains. Close the jump ring. Open another jump ring, attach one length of chain, and attach the snowflake. Close the jump ring.
7.) The last step is to attach your toggle clasp. Open a jump ring, attach one end of chain, and one half of your clasp. Close the jump ring. Do this with other end of chain and other half of the clasp.

▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Music is by Deborah Gan, "White Christmas," "Jingle Bells," & "Silent Night." She does awesome piano covers! (I especially like her Payphone and Gangnam Style covers! Check her out on Facebook and Youtube:

  / debsmusiclife  
   / deborahmusiclife  

▬▬▬▬▬▬▬▬▬▬▬▬▬▬

SOCIALIZE WITH ME
http://www.CatFoxDesigns.com
Facebook –   / catfoxdesigns  
Instagram –   / catfoxdesigns  
Pinterest –   / catfoxdesigns  

BUSINESS INQUIRIES
Please send an email to [email protected]

BRAND NAME UPDATE
Please note "EclecticDesigns by Catherine" was my previous brand name. In 2020, I changed my YouTube brand to be "Cat Fox Designs".

-------------------------------------

Disclaimer: All products used in this video were purchased by me. AllFreeJewelryMaking has compensated me for this video. Music was used with permission.