etrailer | Review of Meyer Snow Plow Bushing Lot Pro A Frame - ME63JR

Описание: Click for more info and reviews of this Meyer Snow Plow Parts:
https://www.etrailer.com/Snow-Plow-Pa...
Check out some similar Snow Plow Parts options:
https://www.etrailer.com/dept-pg-Snow...^_Hardware.aspx

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Meye...
Hi, everybody. Andy here with etrailer. Let's take a quick look at this Meyer snow plow bushing. Now, this is a genuine OEM bushing used on certain Meyer snow plows. It's most commonly used on the Lot Pro A-frame assembly, and its job is pretty straightforward, but it's important. This acts as a wear surface where a pivot bar or pin moves.

By doing that, it's gonna help reduce friction, prevent metal-to-metal contact, and extend the life of the surrounding parts. Physically, this is heavy-duty steel. And let me go ahead and put a ruler up to this. So measuring the diameter here on that side, we're one and a half inches. Flip that around.

Two inches. Inner diameter looks like an inch, and it's .56 inches thick. And because this is a structural bushing, it's usually pressed or installed into the A-frame rather than being a quick bolt-on replacement. This is considered a maintenance or repair component, not an accessory. So if your original bearing wears out, movement at the pivot point can get sloppy, which is going to lead to faster wear on those pins and the A-frame itself.

So replacing it's gonna help restore proper fit and smooth movement. If you happen to have any other questions, whether it's about this or anything else that we have here at etrailer, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need. Well, again, my name is Andy. Thank you for joining me.

.